To mark Barrett-Jackson’s half-century in business, in this special series we’re taking a look back at some of our favorite moments from the past 50 years – as well as some little-known facts about The World’s Greatest Collector Car Auctions.
Heading onto the famous Barrett-Jackson auction block.
Looking at the massive Barrett-Jackson auction block today, it’s hard to imagine that, some 50 years ago, the collector cars simply rolled up between two sections of bleachers from behind a fabric wall.
The Barrett-Jackson auction block is probably one of the most photographed elements of the entire event, with fans who perhaps have watched the auctions for decades on television clamoring to capture an image of themselves in front of the iconic stage.
The block itself is comprised of approximately 200 pieces and, from the point where vehicles enter to the end of the exit ramp, measures about 136 feet in length for the flagship Scottsdale Auction.
Barrett-Jackson’s unique “chassis cam” shows off the gleaming undercarriages of the auction cars.
Including the “lectern” where the auctioneers – along with Barrett-Jackson CEO Craig Jackson and President Steve Davis – stand and various other components, it takes two full days to assemble, with special care given to reinforce the structure for those gleaming collector cars – some of which weigh several tons each. Special air systems have also been incorporated to channel carbon monoxide out of the arena.
Because many of the vehicles look nearly as nice underneath as they do from above, built into the auction block floor is something unique to Barrett-Jackson: a special “chassis cam” to share images of the pristine undercarriages with those in the auction arena and watching via television and bidding online. A giant light bank hangs overhead, specially “tuned” for the live television broadcast and to suitably showcase each vehicle on the famous stage.
A small red ribbon on the “B” of the Barrett-Jackson logo on the auction block pays homage to Nellie Jackson.
Over the years, adjustments have had to be made depending on the auction venue, particularly when it comes to turning angles. If the situation requires a tight turn, Barrett-Jackson has been known to use giant turntables to facilitate the auction vehicles entering and exiting the block.
There’s also one very special element of the auction block that some may not know about: On the “B” of the Barrett-Jackson sign is a small red ribbon in memory of the company’s matriarch, Nellie Jackson, who passed away in 2010.
While the auction block may not look portable, it is! When each event is over, the entire block is disassembled and packed, Tetris-style, into a semitruck, ready for the journey to the next installment of The World’s Greatest Collector Car Auctions.
Title: BUILDING THE AUCTION BLOCK: A 50 Facts & Favorite Memories Feature
Sourced From: www.barrett-jackson.com/Media/Home/Reader/building-the-auction-block-a-50-facts-favorite-memories-feature/
Published Date: Thu, 01 Jul 2021 16:44:18 +0000
Here comes trouble: A Triumph TR6 with a Matchless frame
Kids are impressionable, especially when motorcycles are involved. That magical combination of sound, smell and danger has a way of imprinting itself on young minds. But Kyle Harvey didn’t just dream of bikes as a child—he practically grew up with them.
Kyle’s trade is tool and die making, but his passion is building bikes. His father, Garth Harvey, got Kyle and his brother into bikes at a young age; as soon as they could start their old man’s vintage motorcycles, they were riding them. Living in Edenvale in South Africa’s Gauteng province, the boys also had direct access to the local Classic Motorcycle Club.
The folks at the CMC made quite an impression on young Kyle—and taught him everything he knows about vintage bikes. After helping numerous friends work on their bikes, he went on to open his own shop, named simply ‘The Workshop.’ Kyle has been building and restoring classic motorcycles for over a decade now.
This cheeky bobber is his latest build, and it’s immensely fascinating. The engine’s from a Triumph TR6 Trophy, the frame is from a Matchless, and the quirky handmade details on it are endless.
By: Ben Pilatti
Title: Here comes trouble: A Triumph TR6 with a Matchless frame
Sourced From: www.bikeexif.com/custom-triumph-tr6-matchless-frame
Published Date: Wed, 21 Dec 2022 17:01:12 +0000
Did you miss our previous article…
The Swan Song of the V12
The V12 engine holds a special place in the heart of many automotive and motorsports fans. For some, it’s the sound of Formula 1 through the years, especially during the 1990s. For others, it’s engines like the 6.1 L BMW S70/2 from the McLaren F1 or the 3.9L Lamborghini V12 that powered all their cars from the Miura through to the Diablo. No matter where it lies in your heart, it is the “proper” configuration for many: 6 cylinders per bank, put into a V, and firing in an odd sequence to give it that special roar under power.
Yet, as concerns over fuel efficiency, qualms about environmental impact, and high-powered turbocharged V8 or V6 engines are the norm now, the V12 is slowly, but surely, being put to rest. In fact, the only place that V12s are still hanging on by the last threads of their engine mounting bolts are in supercars, hypercars, and a few ultra-luxury cars. Even then, many exotic brands have announced that their next cars will either be V10s or turbo V8s and V6s.
Since it appears that the swan song of the V12 is reaching a crescendo, we thought it only appropriate to celebrate the few remaining cars out there that carry them. It may be the last time we see some of these brands, many of which are known for their V12s.
The Amazing Last V12 Production Versions from the Big Brands
Ferrari 812 Superfast
Ferrari 812 Superfast. Image via Supercars.
The writing is on the wall for the prancing horse, as the new Ferrari 296 GTB is showing the direction that Maranello is headed. Yet, unless you were invited to snag one of the limited-edition Monza SP1 or SP2 cars, there is still one car you can buy from the legendary marque that has all 12 cylinders fully intact.
The 6.5L F140 GA V12. Image Via: Wikimedia Commons.
The 6.5L F140 GA 65-degree V12 in the front of the 812 is the last road-going version of the V12 that debuted in the Ferrari Enzo. Producing a monstrous 789 HP and 530 lbs-ft of torque, it is no slouch either, as when the 812 Superfast debuted, it was the most powerful naturally aspirated production car engine ever made.
It has the typical low-rev Ferrari roar that rises into a howl as the car revs up to nearly 9,000 RPM, and will catapult the 3,845 (1,744 kg) car to 60 MPH in 2.9 seconds. As far as a curtain call is concerned, that’s a great way to bow out and focus on hybrids and turbocharged engines.
Mercedes-Maybach S680 4MATIC
cedes-Maybach S680 4MATIC. Image via Supercars.
Mercedes-Benz used to be at the very top of the V12 pecking order when it came to luxury performance cars. Such classics as the S 65 AMG from the mid-2000s and the 500 TE AMG W123 Touring from the very end of the 1970s came with big V12s that sound astounding, but the biggest and baddest of the Mercedes V12s left on in a production car is the M279 E60 LA that hauled the S65 AMGs of 2014.
By: Simon Bertram
Title: The Swan Song of the V12
Sourced From: sportscardigest.com/v12-swan-song/
Published Date: Thu, 28 Jul 2022 10:49:26 +0000
Did you miss our previous article…
Road Tested: Gear from Shoei, Akin Moto and Rev’It!
In our continuing quest to source motorcycle gear that combines safety and style, we bring you our thoughts on Shoei’s new ECE 22.06-approved NXR2 helmet. Plus a stealthy riding parka from Akin Moto, and the perfect pair of urban riding gloves from Rev’It!.
Shoei NXR2 helmet It’s no secret that I’m a huge fan of Shoei’s helmets. Every Shoei I’ve owned has fit and felt right from the first wear, with no major deviations in their sizing or shape from model to model. So when I was looking for a do-it-all street helmet to replace my well-used Shoei RYD, the new NXR2 was a no-brainer… and it hasn’t disappointed.
I loved the RYD for its combination of neutral styling, comfort and ventilation. The NXR2 basically feels like a premium version of the RYD; it has the same clean aesthetic, but ramps up the performance. And it’s one of the few helmets that meet with Europe’s new, and more stringent, ECE 22.06 standard.
By: Wesley Reyneke
Title: Road Tested: Gear from Shoei, Akin Moto and Rev’It!
Sourced From: www.bikeexif.com/shoei-akin-moto-revit-review-44
Published Date: Sat, 30 Jul 2022 17:01:31 +0000
Did you miss our previous article…
Fashion2 years ago
Steampunk Clothing & Jewelry
Trending Stories2 years ago
Dior Homme Cologne Men’s Fragrance Review
Fashion2 years ago
Best Timepieces To Buy For The Holiday Season
Motor2 years ago
2022 Infiniti QX55 Carigami Can Be Yours
Sports2 years ago
Best Christmas Gift For Your Golfer Co-Worker
Fashion6 months ago
Julian Schneyder Relaxes with Man About Town
Outdoors6 months ago
California Fishing Season. All You Have to Know
Baller Awards11 months ago
Hugh Grant dismisses those ‘Doctor Who’ rumors