Connect with us

The Universe’s very first stars had an important job. They formed from the primordial elements created by the Big Bang, so they contained no metals. It was up to them to synthesize the first metals and spread them out into the nearby Universe.

The JWST has made some progress in finding the Universe’s earliest galaxies. Can it have the same success when searching for the first stars?

Finding the Universe’s first galaxies is an extremely difficult task and one of the main motivations behind building the JWST. Light from these ancient objects is red-shifted into the infrared, which the JWST excels at sensing. By performing deep-field observations in the infrared, the space telescope has located some of the earliest galaxies.

Webb Deep Field 1 jpg
The JWST has the power to see the most ancient galaxies in the Universe, as shown in this image of its first deep field. Image Credit: NASA, ESA, CSA, and STScI

But the first stars are more ancient than the first galaxies. The first stars formed roughly 50 to 100 million years after the Big Bang, and their light brought an eventual end to the Universe’s Dark Ages. Astrophysicists think that these stars were extremely large, with up to 1000 solar masses.

The new study is titled “The detection and characterization of highly magnified stars with JWST:
Prospects of finding Population III.” It’ll be published in the Monthly Notices of the Royal Astronomical Society. The lead author is Erik Zackrisson from the Department of Physics and Astronomy, Uppsala University, Sweden.

“Due to the lack of efficient coolants and fragmentation in the chemically unenriched gas at these early epochs, the resulting metal-free (a.k.a. Population III) stars are believed to be characterized by extremely high masses (characteristic masses ~ 10 – 1000 solar masses),” the authors write.

To see these early, massive stars, the JWST will need some help from gravitational lensing. “Gravitational lensing may render individual high-mass stars detectable out to cosmological distances, and several extremely magnified stars have in recent years been detected out to redshifts z ~ 6,” the authors explain. At z ~ 6, the light has taken over 12.7 billion light-years to reach us.

Gravitational lensing takes advantage of situations where a massive foreground object, like a galaxy cluster, is between us and an object we want to observe. As the light from the target passes by the foreground object—called a gravitational lens—the light is magnified. That makes the otherwise invisible object visible.

Gravitational lensing galaxyApril12 2010 1024x768 e1423889733882 jpg
This illustration shows a phenomenon known as gravitational lensing, which is used by astronomers to study very distant and very faint objects. Note that the scale has been greatly exaggerated in this diagram. In reality, the distant galaxy is much further away and much smaller. Image Credit: NASA, ESA & L. Calcada

The first stars are at about z=20 in terms of redshift, and the JWST should be able to see that light if it can make use of gravitational lensing. If it can, then the powerful telescope will start to give us observational evidence for a period of time in the early Universe that so far we understand mostly through theory: the Epoch of Reionization (EoR).

During the EoR, the Universe was dominated by a dense, obscuring fog of hydrogen gas. When the first stars formed, their ultraviolet light reionized the gas, allowing light to travel.

Continue Reading

Frontier Adventure

Artemis Astronauts Will Deploy New Seismometers on the Moon

fiber.width 450 193x250 1

Back in the 1960s and 1970s, Apollo astronauts set up a collection of lunar seismometers to detect possible Moon quakes. These instruments monitored lunar activity for eight years and gave planetary scientists an indirect glimpse into the Moon’s interior. Now, researchers are developing new methods for lunar quake detection techniques and technologies. If all goes well, the Artemis astronauts will deploy them when they return to the Moon.

fiber.width 450 193x250 2
Fiber optic cable is the heart of a seismology network to be deployed on the Moon by future Artemis astronauts.

The new approach, called distributed acoustic sensing (DAS), is the brainchild of CalTech geophysics professor Zhongwen Zhan. It sends laser beams through a fiber optic cable buried just below the surface. Instruments at either end measure how the laser light changes during the shake-induced tremors. Basically Zhan’s plan turns the cable into a sequence of hundreds of individual seismometers. That gives precise information about the strength and timing of the tremors. Amazingly, a 100-kilometer fiber optic cable would function as the equivalent of 10,000 seismometers. This cuts down on the number of individual seismic instruments astronauts would have to deploy. It probably also affords some cost savings as well.

A seismometer station deployed on the Moon during the Apollo 15 mission. Courtesy NASA.
A seismometer station deployed on the Moon during the Apollo 15 mission. Courtesy NASA.

DAS and Apollo on the Moon

Compare DAS the Apollo mission seismometer data and it becomes obvious very quickly that DAS is a vast improvement. In the Apollo days, the small collection of instruments left behind on the Moon provided information that was “noisy”. Essentially, when the seismic waves traveled through different parts of the lunar structure, they got scattered. This was particularly true when they encountered the dusty surface layer. The “noise” basically muddied up the signals.

Lunar seismic instruments Apollo 11214 2020 709 Fig6 HTML 436x580 1
The layout for the Apollo Lunar Seismic Profiling Experiment for the Apollo 17 mission. Courtesy Nunn, et al.

What DAS Does to Detect Quakes on the Moon

The DAS system stations laser emitters and data collectors at each end of a fiber optic cable. This allows for multiple widely spaced installations that measure light as it transits the network. The cable consists of glass strands, and each strand contains tiny imperfections. That sounds bad, but each imperfection provides a useful “waypoint” that reflects a little bit of the light back to the source. That information gets recorded as part of a larger data set. Setting up such a system of
Did you miss our previous article…

Continue Reading

Frontier Adventure

Ice Deposits on Ceres Might Only Be a Few Thousand Years Old

psjad3639f4 hr

The dwarf planet Ceres has some permanently dark craters that hold ice. Astronomers thought the ice was ancient when they were discovered, like in the moon’s permanently shadowed regions. But something was puzzling.

Why did some of these shadowed craters hold ice while others did not?

Ceres was first discovered in 1801 and was considered a planet. Later, it was thought to be the first asteroid ever discovered, since it’s in the main asteroid belt. Since then, our expanding knowledge has changed its definition: we now know it as a dwarf planet.

Even though it was discovered over 200 years ago, it’s only in the last couple of decades that we’ve gotten good looks at its surface features. NASA’s Dawn mission is responsible for most of our knowledge of Ceres’ surface, and it found what appeared to be ice in permanently shadowed regions (PSRs.)

New research shows that these PSRs are not actually permanent and that the ice they hold is not ancient. Instead, it’s only a few thousand years old.

The new research is titled “History of Ceres’s Cold Traps Based on Refined Shape Models,” published in The Planetary Science Journal. The lead author is Norbert Schorghofer, a senior scientist at the Planetary Science Institute.

“The results suggest all of these ice deposits must have accumulated within the last 6,000 years or less.”

Norbert Schorghofer, senior scientist, Planetary Science Institute.

Dawn captured its first images of Ceres while approaching the dwarf planet in January 2015. At that time, it was close enough to capture images as good as Hubble’s. Those images showed craters and a high-albedo site on the surface. Once captured by Ceres, Dawn followed a polar orbit with decreasing altitude. It eventually reached 375 km (233 mi) above the surface, allowing it to see the poles and surface in greater detail.

“For Ceres, the story started in 2016, when the Dawn spacecraft, which orbited around Ceres at the time, glimpsed into these permanently dark craters and saw bright ice deposits in some of them,” Schorghofer said. “The discovery back in 2016 posed a riddle: Many craters in the polar regions of Ceres remain shadowed all year – which on Ceres lasts 4.6 Earth years – and therefore remain frigidly cold, but only a few of them harbor ice deposits.”

As scientists continued to study Ceres, they made another discovery: its massive Solar System neighbours make it wobble.

“Soon, another discovery provided a clue why: The rotation axis of Ceres oscillates back and forth every 24,000 years due to tides from the Sun and Jupiter. When the axis tilt is high and the seasons strong, only a few craters remain shadowed all year, and these are the craters that contain bright ice deposits,” said lead author Schorghofer.

This figure from the research shows how Ceres' obliquity has changed over the last 25,000 years. As the obliquity varies, sunlight reaches some crater floors that were thought to be PSRs. Image Credit: Schorghofer et al. 2023.
This figure from the research shows how Ceres’ obliquity has changed over the last 25,000 years. As the obliquity varies, sunlight reaches some crater floors that were thought to be PSRs. Image Credit: Schorghofer et al. 2023.

Researchers constructed digital elevation maps (DEMs) of the craters to uncover these facts. They wanted to find out how large and deep the shadows in the craters were, not just now but thousands of years ago. But that’s difficult to do since portions of these craters were in deep shadow when Dawn visited. That made it difficult to see how deep the craters were.

Robert Gaskell, also from the Planetary Science Institute, took on the task. He developed a new technique to create more accurate maps of the craters with data from Dawn’s sensitive Framing Cameras, contributed to the mission by Germany. With improved accuracy, these maps of the crater floors could be used in ray tracing to show sunlight penetrated the shadows as Ceres wobbled over thousands of years.

psjad3639f3 hr

Continue Reading

Frontier Adventure

Amazing Amateur Images of April 8th’s Total Solar Eclipse

Tony 1024x669 1 jpg

The last total solar eclipse across the Mexico, the U.S. and Canada for a generation wows observers.

Did you see it? Last week’s total solar eclipse did not disappoint, as viewers from the Pacific coast of Mexico, across the U.S. from Texas to Maine and through the Canadian Maritime provinces were treated to an unforgettable show. The weather threw us all a curve-ball one week out, as favored sites in Texas and Mexico fought to see the event through broken clouds, while areas along the northeastern track from New Hampshire and Maine onward were actually treated to clear skies.

Many eclipse chasers scrambled to reposition themselves at the last minute as totality approached. In northern Maine, it was amusing to see tiny Houlton, Maine become the epicenter of all things eclipse-based.

Tales of a Total Solar Eclipse

We were also treated to some amazing images of the eclipse from Earth and space. NASA also had several efforts underway to chase the eclipse. Even now, we’re still processing the experience. It takes time (and patience!) for astro-photos to make their way through the workflow. Here are some of the best images we’ve seen from the path of totality:

Tony Dunn had an amazing experience, watching the eclipse from Mazatlan, Mexico. “When totality hit, it didn’t look real,” Dunn told Universe Today. “It looked staged, like a movie studio. the lighting is something that can’t be experienced outside a total solar eclipse.”

Totality with prominences.
Totality on April 8th, with prominences. Credit: Tony Dunn.

Dunn also caught an amazing sight, as the shadow of the Moon moved across the low cloud cover:

#Eclipse2024 #Mazatlan The shadow of the Moon crosses the sky.

— Tony Dunn (@tony873004) April 14, 2024

Black Hole Sun

Peter Forister caught the eclipse from central Indiana. “It was my second totality (after 2017 in South Carolina), so I knew what was coming,” Forister told Universe Today. “But it was still as incredible and beautiful as anything I’ve ever seen in nature. The Sun and Moon seemed huge in my view—a massive black hole (like someone took a hole punch to the sky) surrounded by white and blue flames streaking out. Plus, there was great visibility of the planets and a few stars. The memory has been playing over and over in my head since it happened—and it’s combined with feelings of awe and wonder at how beautiful our Universe and planet really are. The best kind of memory!”

Totality over Texas. Credit: Eliot Herman

Like many observers, Eliot Herman battled to see the eclipse through clouds. “As you know, we had really frustrating clouds,” Herman told Universe Today. “I shot a few photos (in) which you can see the eclipse embedded in the clouds and then uncovered to show the best part. For me it almost seemed like a cosmic mocking, showing me what a great eclipse it was, and lifting the veil only at the end of the eclipse to show me what I missed…”

Totality and solar

Continue Reading