Connect with us

Nature is stingy with its secrets. That’s why humans developed the scientific method. Without it, we’d still be ignorant and living in a world dominated by superstitions.

Astrophysicists have made great progress in understanding how stars form, thanks to the scientific method. But there’s a lot they still don’t know. That’s one of the reasons NASA built the James Webb Space Telescope: to coerce Nature into surrendering its deeply-held secrets.

In our time, the scientific method can’t accomplish much without powerful scientific instruments, and the JWST is one of the most powerful ever devised. It has the power to examine star formation regions in more detail than any other telescope, teasing out previously unseen details and processes. As it does so, it gathers some startling images.

In this image, the blue tendrils are emissions from dusty silicates, a common type of dust, and polycyclic aromatic hydrocarbons (PAHs.) PAHs are organic compounds that scientists think could be some of life’s building blocks. The more diffuse red regions are made of warm dust heated by the massive, bright stars in the region’s center. The faint arcs in the image may be created by light reflecting off the central stars. The brightest patches and filaments indicate regions brimming with abundant protostars.

This image is just one way that the JWST can examine star-forming regions. But nature sends clues out in multiple wavelengths, and it’s up to us to decipher it. The leading image was taken with the space telescope’s Mid-Infrared Instrument (MIRI.) Back in January, the telescope imaged the same region with its NIRCam instrument, and it sees in the near-infrared portion of the spectrum.

This is the JWST's NIRCam image of the same region, NGC 346. This image cuts through more of the gas and dust to reveal more individual stars. Combining the images gives astronomers a more complete idea of the star-forming region. Image Credit: NASA, ESA, CSA, STScI, A. Pagan (STScI); CC BY 4.0
This is the JWST’s NIRCam image of the same region, NGC 346. This image cuts through more of the gas and dust to reveal more individual stars. Combining the images gives astronomers a more complete idea of the star-forming region. Image Credit: NASA, ESA, CSA, STScI, A. Pagan (STScI); CC BY 4.0

There’s a near-infinite selection of targets that the JWST could study during its mission. Why NGC 346?

The star-forming region is in the Small Magellanic Cloud, and the SMC has a much lower metallicity than the Milky Way. That means it’s made of mostly hydrogen and helium and very little else. It’s similar to the ancient Universe. It takes generations of stars living and dying to create heavier elements—or metals—so the SMC’s low metallicity is similar to the early Universe. In the early Universe, there wasn’t enough time for many stars to live and die and spread their heavy elements out into space.

Studying star formation in the SMC and NGC 346 is an analog for studying star formation in the early Universe. Specifically, it’s similar to the Universe’s ‘Cosmic Noon’ about two or three billion years after the Big Bang when star formation peaked.

Cosmic Noon Timeline
Peak star formation occurred during the ‘Cosmic Noon’ about 2 or 3 billion years ago. Image Credit: ESA (acknowledgement: work performed by ATG under contract to ESA), CC BY-SA 3.0 IGO

“A galaxy during cosmic noon wouldn’t have one NGC 346, as the Small Magellanic Cloud does; it would have thousands,” said Margaret Meixner, an astronomer at the Universities Space Research
Did you miss our previous article…
https://mansbrand.com/this-is-what-it-would-be-like-to-fly-across-mars/

Total
0
Shares
Share 0
Tweet 0
Pin it 0
Share 0
Related Topics:
Continue Reading

Frontier Adventure

Fly Slowly Through Enceladus’ Plumes to Detect Life

enceladusfountains med.thumbnail 2 jpg

Enceladus is blasting water into space from the jets at its southern pole. This makes it the ideal place to send a dedicated mission, flying the spacecraft through the plumes with life-detection instruments s. A new study suggests that a spacecraft must proceed carefully through the plumes, keeping its speed below 4.2 km/second (2,236 miles per hour). Using a specialized, custom-built aerosol impact spectrometer at these speeds will allow fragile amino acids to be captured by the spacecraft’s sample collector. Any faster, they’ll shatter, providing inclusive results.

One of the biggest surprises of the 20-year Cassini mission to the Saturn system was the discovery of the active geysers at Enceladus. At only about 500 km (310 miles) in diameter, the ice-covered Enceladus should be too small and too far from the Sun to be active. Instead, this little moon is one of the most geologically dynamic objects in the Solar System.

enceladusfountains_med.thumbnail.jpg
Geysers spew from Enceladus in this image from the Cassini spacecraft. Credit: NASA/Cassini mission.

Cassini’s stunning backlit images of this moon show plumes erupting in Yellowstone-like geysers, emanating from tiger-stripe-shaped fractures in the moon’s surface. The discovery of the geysers took on more importance when Cassini later determined the plumes contained water ice and organics. Since life as we know it relies on water and a source of energy, this small but energetic moon has been added to the short list of possible places for life in our Solar System.

During three of Cassini’s passes of Enceladus in 2008 and 2009, the spacecraft’s Cosmic Dust Analyser measured the composition of freshly ejected plume grains. The icy particles hit the detector target at speeds of 6.5–17.5 km/s, and vaporized instantly. While electrical fields inside the instrument were able to separate the various constituents of the resulting impact cloud for analysis, for a future mission, scientists would like to measure the particles in the plumes without completely vaporizing them.

Back in 2012, researchers from the University of California San Diego started working on a custom-built unique aerosol impact spectrometer, designed to study collision dynamics of single aerosols and particles at high velocities. Although it wasn’t built specifically to study ice grain impacts, it turns out this instrument might be exactly what planetary scientists are looking for to use at Enceladus, or even at Jupiter’s moon Europa, where there is growing evidence of active plumes of water vapor erupting from its surface.

Robert Continetti’s one-of-a-kind aerosol impact spectrometer was used in this experiment. Ice grains impact the microchannel plate detector (far right) at hypervelocity speeds, which can then be characterized in-situ.

Continetti and several colleague have now tested the device in a laboratory, showing that amino acids transported in ice plumes — like at Enceladus — can survive impact speeds of up to 4.2 km/s. Their research is published in The Proceedings of the National Academy of Sciences (PNAS).

“This apparatus is the only one of its kind in the world that can select single particles and accelerate or decelerate them to chosen final velocities,” said Robert Continetti, a professor from UC San Diego, in a press release. “From several micron diameters down to hundreds of nanometers, in a variety of materials, we’re able to examine particle behavior, such as how they scatter or how their structures change upon impact.”

From Cassini’s measurements, scientists estimate the ice plumes at Enceladus blast out at approximately .4 km/s (800 miles per hour). A spacecraft would have to fly at the right speeds to make sure the particles could be captured intact.

opo1633a 1024x1024 1 jpg
This composite image shows suspected plumes of water vapour erupting at the 7 o’clock position off the limb of Jupiter’s moon Europa. The plumes, photographed by Hubble’s Imaging
Did you miss our previous article…
https://mansbrand.com/the-international-space-station-celebrates-25-years-in-space/

Continue Reading

Frontier Adventure

The International Space Station Celebrates 25 Years in Space

DrRDzDDX0AEQSxB 750 jpg

NASA recently celebrated the 25th anniversary of the International Space Station (ISS) with a space-to-Earth call between the 7-person Expedition 70 crew and outgoing NASA Associate Administrator, Bob Cabana, and ISS Program Manager, Joel Montalbano. On December 6, 1998, the U.S.-built Unity module and the Russian-built Zarya module were mated in the Space Shuttle Endeavour cargo bay, as Endeavour was responsible for launching Unity into orbit that same day, with Zarya having waited in orbit after being launched on November 20 from Kazakhstan.

“I cannot believe it was 25 years ago today that we grappled Zarya and joined it with the Unity node,” said Cabana during the call from NASA Headquarters in Washington, D.C. “Absolutely amazing.”

While this milestone marks 25 years since the first two ISS modules were attached, it would be another two years until the ISS had a crew, Expedition 1, which arrived at the ISS in November 2000 and stayed until March 2001, beginning an uninterrupted human presence on the ISS that continues today. During the two-year period between the first mating and Expedition 1, the Russian-built Zvedza module was attached to the Unity and Zarya modules on July 26, 2000, after launching from Kazakhstan two weeks earlier. Assembly of the large modules of the ISS would continue until 2021 when the Roscosmos-funded Nauka module was attached in July 2021.

Now in its final configuration, the ISS is approximately the size of an American gridiron football field consisting of 8 solar arrays that provide the station’s power while maintaining an average altitude of 400 kilometers (250 miles). Its massive size consists of a pressurized module length along the major axis of 67 meters (218 feet), a truss (primary body) length of 94 meters (310 feet), a solar array length (measured along the truss) of 73 meters (239 feet), and a total mass of 419,725 kilograms (925,335 pounds).

DrRDzDDX0AEQSxB 750 1 jpg
Artist rendition of the ISS compared to an American gridiron football field. (Credit: NASA)
The station pictured from the SpaceX Crew Dragon 5 cropped 750 jpg
Image of the ISS taken by SpaceX Crew-2 mission on November 8, 2021 after it successfully undocked from the ISS Harmony module. (Credit: NASA)

Ever since the 3-person Expedition 1 crew first took command of the ISS, a total of 273 individuals from 21 countries have visited the orbiting laboratory and have been comprised of trained astronauts and private visitors. From most visitors to least, the following visitor countries include the United States, Russia, Japan, Canada, Italy, France, Germany, Saudi Arabia, United Arab Emirates, Belgium, Brazil, Denmark, Great Britain, Israel, Kazakhstan, Malaysia, Netherlands, South Africa, South Korea, Spain, and Sweden.

“One of my favorite aspects of the International Space Station is the international part of it,” said NASA Astronaut and Expedition 70 Flight Engineer, Jasmin Moghbeli, during the call. “We each bring our unique perspectives, not just from our different nationalities, but also our different backgrounds. I think we’re definitely strengthened by the international partnership. It’s just like gaining redundancy when you have multiple partners working together. It’s stronger and more resilient to any sort of problems or obstacles that come our way and so it definitely makes us stronger. And I think that’s why we have had the International Space Station up here for 25 years now.”

photo 7 1 750 1

Continue Reading

Frontier Adventure

Starship | Second Flight Test

hqdefault 2

hqdefault 3

On November 18, 2023, Starship successfully lifted off at 7:02 a.m. CT from Starbase on its second integrated flight test.

While it didn’t happen in a lab or on a test stand, it was absolutely a test. What we did with this second flight will provide invaluable data to continue rapidly developing Starship.

The test achieved a number of major milestones, helping us improve Starship’s reliability as SpaceX seeks to make life multiplanetary. The team at Starbase is already working final preparations on the vehicles slated for use in Starship’s third flight test.

Congratulations to the entire SpaceX team on an exciting second flight test of Starship!

Follow us on X.com/SpaceX for continued updates on Starship’s progress

Did you miss our previous article…
https://mansbrand.com/for-its-final-trick-chandrayaan-3-brings-its-propulsion-module-to-earth-orbit/

Continue Reading

Trending