Connect with us

Engineers at NASA have completed an important milestone in developing the Interstellar Mapping and Acceleration Probe (IMAP) spacecraft. It’s now moving from development and design to the assembly, testing, and integration phase, targeting a launch in late Spring 2025. After launch, the spacecraft will fly to the Earth-Sun L1 Lagrange Point and analyze how the Sun’s solar wind interacts with charged particles originating from outside the Solar System.

IMAP will follow up on discoveries and insights from the two Voyager spacecraft and the Interstellar Boundary Explorer (IBEX) and will help investigate two of the most important overarching issues in heliophysics: the energization of charged particles from the Sun and the interaction of the solar wind at its boundary with interstellar space.

The mission will map the boundaries of the heliosphere — the electromagnetic bubble surrounding and protecting our solar system — and help researchers better understand the boundary of the heliosphere.  This region is where the constant flow of particles from our Sun, called the solar wind, collides with material from the rest of the galaxy. This collision limits the amount of harmful cosmic radiation entering the heliosphere.  

two helio models 1024x373 2 jpg
An updated model (left) suggests the shape of the Sun’s bubble of influence, the heliosphere, may be a deflated croissant shape, rather than the long-tailed comet shape suggested by other research (right). The white lines represent the solar magnetic field, while the red lines represent the interstellar magnetic field. Image Credits Opher, et al

It will also help settle the debate on the actual shape of the heliosphere. A study in 2020, using data from several spacecraft, suggested that the Sun’s bubble of influence may be a deflated croissant shape, rather than the long-tailed comet shape that has previously been

The spacecraft will be positioned about 1.5 million km (1 million miles) from Earth and will collect and analyze particles that make it through to help chart and understand the range of particles in interplanetary space.  

The milestone the IMAP mission recently met is called Key Decision Point D, which allows the mission to move from development and design to the testing and integration phase. The targeted launch date was moved back one months, from late April to May 2025 to ensure that the project team has the adequate resources to “address risks and technical complexities during system integration and testing,” NASA said in a recent mission blog post.

The spacecraft is currently being assembled inside the clean room at the Johns Hopkins Applied Physics Lab in Laurel, Maryland. There is a live, 24-hour feed where you can watch the assembly, integration, and testing.

During the next few months, engineers will install the electronics, communications systems, thermal systems, propulsion, batteries, and many more complex systems to make the spacecraft work. Additionally, all 10 of IMAP’s instruments will soon start to arrive from around the world and be integrated with the spacecraft one by one. Finally, the spacecraft will begin testing before being sent to NASA’s Goddard Space Flight Center for final testing prior to launch.

Learn more about the mission and the huge team of universities and organizations that are part of IMAP at the mission website.

The post NASA’s Interstellar Mapping Probe Prepares for a 2025 Launch appeared first on Universe Today.

Did you miss our previous article…
https://mansbrand.com/does-betelgeuse-even-rotate-maybe-not/

Continue Reading

Frontier Adventure

Curiosity Rover is Climbing Through Dramatic Striped Terrain on Mars

Mars Curiosity from HiRISE Circled PIA26245 figA 580x460 1 jpg

Just about every day we here on Earth get a breathtaking picture of Mars’s terrain sent back by a rover. But, the view from space can be pretty amazing, too. The Mars Reconnaissance Orbiter (MRO) just sent back a thought-provoking picture of Curiosity as it makes its way up a steep ridge on Mount Sharp.

The rover is a tiny black dot in the center of the image, which gives a good feeling for what MRO’s HiRISE camera accomplished. For scale, the rover is about the size of a dinner table, sitting in a region of alternating dark and light bands of material on the Red Planet.

NASA's Curiosity Mars rover appears as a dark speck in this image captured from directly overhead by the agency's Mars Reconnaissance Orbiter, or MRO. Credit: NASA/JPL-Caltech/University of Arizona
NASA’s Curiosity Mars rover appears as a dark speck in this image captured from directly overhead by the agency’s Mars Reconnaissance Orbiter, or MRO. Credit: NASA/JPL-Caltech/University of Arizona

Where’s Curiosity?

The Curiosity rover is exploring an ancient ridge on the side of Mount Sharp, which is the peak of a crater on Mars. It’s sitting on the side of a feature called Gediz Vallis Ridge, and the terrains and materials preserve a record of what things were like when water last flowed there. That happened about three billion years ago. The force of the flow brought significant amounts of rocks and debris through the region. They piled up to form the ridge. So, much of what you see here is the desiccated remains of that flooding.

Debris flows are pretty common here on Earth, particularly in the aftermath of floods, volcanic eruptions, tsunamis, and other actions. We can see them wherever material floods through a region or down a slope. In a flood-based flow, the speed of the water combines with gravity and the degree of slope to send material rushing across the surface. A debris flow can also be a dry landslide, and those can occur pretty much anywhere on Earth where the conditions are right. Another type of debris flow comes from volcanic activity. That occurs when material erupts from a volcano, or when earthquakes combined with an eruption collapse material into the side of the mountain. That results in what’s called a “lahar”. Folks in North America might recall the Mount St. Helens eruption in 1980; it resulted in several lahars that buried parts of the surrounding terrain.

Now that scientists see similar-seeming regions on Mars, they want to know several things. How did they form? Were they created by the same processes that make them on Earth? And, how long ago did they begin to form? Curiosity and Perseverance and other rovers and landers have been sent to Mars to help answer those questions.

Understanding the Debris Ridge

Did any of these actions happen on Mars? The evidence is pretty strong, which is why Gediz Vallis itself is a major exploration goal for the rover. It’s a canyon that stretches across 9 kilometers of the Martian surface and is carved about 140 meters deep. Gediz was likely carved by so-called “fluvial” activity (meaning flowing action) in the beginning. Later floods deposited a variety of fine-grained sands and rocks. Over time, winds have blown a lot of that material away, leaving behind protected pockets of materials left behind by the flooding. The size of the rocks tells something about the speed of the flows that deposited all the material. Geological studies of those rocks will reveal their mineral compositions, including their exposure to water over time.

The Gediz Vallis ridge resulted from the action of water pushing rocks and dirt around to build it up over time. Planetary scientists now need to figure out the sequence of events that created it. The clues lie in the scattered rocks in the region and the surrounding terrain. Mount Sharp itself (formally known as Aeolis Mons), is about 5 kilometers high and is, essentially, a stack of layered sedimentary rocks. As Curiosity makes its way up the mountain, it explores younger and younger materials.

https://mansbrand.com/a-giant-gamma-ray-bubble-is-a-source-of-extreme-cosmic-rays/

Continue Reading

Frontier Adventure

A Giant Gamma-Ray Bubble is a Source of Extreme Cosmic Rays

Gamma ray burst illustration article jpg

Gamma-ray bursts (GRBs) are one of the most powerful phenomena in the Universe and something that astronomers have been studying furiously to learn more about their origins. In recent years, astronomers have set new records for the most powerful GRB ever observed – this includes GRB 190114C, observed by the Hubble Space Telescope in 2019, and GRB 221009A, detected by the Gemini South telescope in 2022. The same is true for high-energy cosmic rays that originate from within the Milky Way, whose origins are still not fully understood.

In a recent study, members of China’s Large High Altitude Air Shower Observatory (LHAASO) Collaboration discovered a massive gamma-ray burst (designated GRB 221009A) in the Cygnus star-forming region that was more powerful than 10 peta-electronvolts (PeV, 1PeV=1015eV), over ten times the average. In addition to being the brightest GRB studied to date, the team was able to precisely measure the energy spectrum of the burst, making this the first time astronomers have traced cosmic rays with this energy level back to their source.

The team was led by Prof. Cao Zhen, a professor at the Institute of High Energy Physics of the Chinese Academy of Sciences (CAS-IHEP), and included CAS members Dr. Gao Chuandong, Dr. Li Cong, Prof. Liu Ruoyu, and Prof. Yang Ruizhi. Their results were described in a paper titled “An ultrahigh-energy gamma-ray bubble powered by a super PeVatron,” which appeared on November 15th in Science Bulletin. The LHAASO Collaboration comprises over 280 members representing 32 astrophysics research institutions worldwide.

The Large High-Altitude Air Shower Observatory (LHAASO) is a composite array made up of 5216 electromagnetic particle detectors, 1188 muon detectors, a 78,000-square-meter water Cherenkov detector array, and 18 wide-angle Cherenkov telescopes. The observatory is located at a height of 4,410 meters (14468.5 ft) on Mount Haizi in Sichuan Province, China, and is dedicated to studying cosmic rays. When cosmic rays reach Earth’s atmosphere, they create “showers” of secondary particles, some of which reach the surface.

The origin of cosmic rays is one of the most important issues in astrophysics today. In the past few decades, astronomers have detected three high-energy GRBs at a peak of about one petaelectronvolts (PeVs) – one quadrillion electronvolts (1015eV) – in their energy spectrum. Scientists believe cosmic rays with energy beneath this level come from astrophysical sources within the Milky Way (like supernovae). This peak energy represents a limit for cosmic rays, which generally take the form of protons accelerated to near-light speed.

However, the origins of cosmic rays in the region of a few petaelectronvolts remain one of the more intriguing mysteries in astrophysics today. Based on data acquired by LHAASO, the Collaboration team discovered a giant ultra-high-energy gamma-ray bubble in the Cygnus X cluster (the largest star-forming region in the Solar neighborhood) located roughly 2.4 billion light-years from Earth. Photons detected inside the structure showed a maximum energy reading of 2.5 PeV, while those ejected showed energy values of up to 20 PeV – the highest ever recorded.

From this, the team inferred the presence of a massive cosmic ray accelerator near the center of the Bubble, which they believe to be the massive star cluster Cygnus OB2 within Cygnus X. This cluster is composed of many young massive stars, including blue-white O-type giants and B-type blue giants, with surface temperatures of over 35,000 and 15,000 °C (63,000 and 27,000 °F), respectively. These stars generate radiation pressure hundreds to millions of times that of the Sun that blows stellar surface material away, creating solar winds that move at speeds of up to thousands of kilometers per second.

GRB
GRB 221009A: looking back through time. Credit: ESA

Collisions between this wind and the ISM create high-energy gamma rays and the ideal environment for efficient particle acceleration. These findings represent the highest-energy cosmic rays detected to date and the first cosmic ray accelerator ever observed. The team’s observations also indicated that the
Did you miss our previous article…
https://mansbrand.com/hiking-half-dome-how-to-do-it-right-and-get-a-permit-2/

Continue Reading

Frontier Adventure

Hiking Half Dome: How to Do It Right and Get a Permit

Tet19 047 Me on Teton Crest Trail copy cropped 4 jpg

By Michael Lanza

No hike in the country really compares with Yosemite’s Half Dome. The long, very strenuous, challenging, and incredibly scenic day trip to one of the most iconic and sought-after summits in America begins with ascending the Mist Trail through the shower constantly raining down from 317-foot Vernal Fall and below thunderous, 594-foot Nevada Fall. Climbing the cable route up several hundred feet of steep granite slab delivers a thrill that partly explains the hike’s enormous popularity.

The 8,800-foot summit of Half Dome—where many hikers complete the experience by standing on The Visor, a granite brim jutting out over Half Dome’s sheer, 2,000-foot Northwest Face—delivers an incomparable view of Yosemite Valley and a 360-degree panorama of a big swath of the park’s mountains.

Half Dome validates every step of effort you put into it.

Having been up and down those cables a handful of times over more than 30 years of dayhiking and backpacking all over the country—including many years running this blog and previously as the Northwest Editor of Backpacker magazine for 10 years—I consider Half Dome one of the very best dayhikes in the entire National Park System and certainly one of America’s hardest dayhikes.

Tet19 047 Me on Teton Crest Trail copy cropped 5 jpg
Hi, I’m Michael Lanza, creator of The Big Outside. Click here to sign up for my FREE email newsletter. Join The Big Outside to get full access to all of my blog’s stories. Click here for my e-books to classic backpacking trips. Click here to learn how I can help you plan your next trip.

A hiker atop Half Dome in Yosemite National Park.
” data-image-caption=”Mark Fenton on The Visor of Half Dome, high above Yosemite Valley, in Yosemite National Park.
” data-medium-file=”https://i0.wp.com/thebigoutside.com/wp-content/uploads/2018/07/Yos11-041-Mark-summit-of-Half-Dome-Yosemite-N.P.-CA-2.jpg?fit=300%2C199&ssl=1″ data-large-file=”https://i0.wp.com/thebigoutside.com/wp-content/uploads/2018/07/Yos11-041-Mark-summit-of-Half-Dome-Yosemite-N.P.-CA-2.jpg?fit=900%2C598&ssl=1″ src=”https://i0.wp.com/thebigoutside.com/wp-content/uploads/2018/07/Yos11-041-Mark-summit-of-Half-Dome-Yosemite-N.P.-CA-2.jpg?resize=900%2C598&ssl=1″ alt=”A hiker atop Half Dome in Yosemite National Park.” class=”wp-image-35446″ srcset=”https://i0.wp.com/thebigoutside.com/wp-content/uploads/2018/07/Yos11-041-Mark-summit-of-Half-Dome-Yosemite-N.P.-CA-2.jpg?resize=1024%2C680&ssl=1 1024w, https://i0.wp.com/thebigoutside.com/wp-content/uploads/2018/07/Yos11-041-Mark-summit-of-Half-Dome-Yosemite-N.P.-CA-2.jpg?resize=300%2C199&ssl=1 300w, https://i0.wp.com/thebigoutside.com/wp-content/uploads/2018/07/Yos11-041-Mark-summit-of-Half-Dome-Yosemite-N.P.-CA-2.jpg?resize=768%2C510&ssl=1 768w, https://i0.wp.com/thebigoutside.com/wp-content/uploads/2018/07/Yos11-041-Mark-summit-of-Half-Dome-Yosemite-N.P.-CA-2.jpg?resize=1080%2C717&ssl=1 1080w, https://i0.wp.com/thebigoutside.com/wp-content/uploads/2018/07/Yos11-041-Mark-summit-of-Half-Dome-Yosemite-N.P.-CA-2.jpg?w=1200&ssl=1 1200w” sizes=”(max-width: 900px) 100vw, 900px” data-recalc-dims=”1″ />Mark Fenton on The Visor or Half Dome, high above Yosemite Valley, in Yosemite National Park. Click photo to read about this backpacking trip.

The cables are up for hiking Half Dome from late May through mid-October. A permit is required for this popular dayhike and a permit lottery takes place throughout March. Yosemite requires a reservation to drive into or through the park on some days from April 13 through Oct. 27; nps.gov/yose/planyourvisit/reservations.htm.

This story shares what I’ve learned about navigating the competitive permit system and embarking on such a demanding day of hiking that’s roughly 16 miles round-trip with almost 5,000 feet of elevation gain and loss. Please share your thoughts or questions about hiking Half Dome in the comments section at the bottom of this story. I try to respond to all comments
Did you miss our previous article…
https://mansbrand.com/new-study-addresses-how-lunar-missions-will-kick-up-moondust/

Continue Reading

Trending